Fire-Rated Wall Panel

BRUCHAPaneel® WP-F

Brucha WP-F panels are insulated metal panels with non-combustible mineral wool cores to address fire protection and code requirements in building designs. Panels are available in 10 different insulation thicknesses – including 1-hour and 2-hour fire rated options — assuring a solution for nearly any construction requirement.

Our WP-F panel is manufactured to assure secure adhesion of the mineral wool and steel faces. The panel joints uniquely possess a moisture barrier film longitudinally covering the mineral wool as protection against water pick-up or damage in handling/installation.

Like its mated WP wall panel in polyiso foam, the panel is designed for use as a through-fastened exterior façade panel or as partition walls for the assembly of interior rooms. Similarly, WP-F is available in the same full range of color and profile options offering a wide variety in project design.

Connect with an expert
* Contact BRUCHA directly for pricing and inquiries

At a Glance

BRUCHAPaneel® WP-F

Manufacturing Tolerance

In line with EN 14509

Construction Width

43 5/16 in (1100 mm)

SPECIAL WIDTH
39 3/8 in (1000 mm)

Sound Insulation

approx. 32 dB (frequency-dependent)

Manufactured Lengths

max 40 ft. (45 ft. by special arrangement)

Temperature Stability

194° F / 90° C

Fire Rating

FM 4880 Class 1 Fire Rating of Insulated Wall or Wall and Roof/Ceiling Panels, Interior Finish Materials or Coatings, and Exterior Wall Systems

Thickness

2 3/8 in (60 mm) – 9 7/16 in (240 mm)

Composition & Attributes

Coil-coated galvanized steel-faced panels with mineral wool core insulation

exterior

  • Standard 25μm polyester surface coating.  (Optional higher UV and chemical resistant coatings available upon request.)  Panels are shipped with a strippable PVC protective film.  The film must be removed no later than 10 weeks after the production date shown on the longitudinal panel seam.
  • Profile options 1 – 6 available
  • Metal gauge: 0.0236″ (0.6mm) – approx. 9% thicker than 26 gauge.  (Alternative metal gauges available on request.)

interior

  • Standard 25μm polyester surface coating.  Panels are shipped with a strippable PVC protective film.  The film must be removed no later than 10 weeks after the production date shown on the longitudinal panel seam.
  • Standard Profile 1 (Profiles 2 and 3 available on request)
  • Metal gauge: 0.0236″ (0.6mm) – approx. 9% thicker than 26 gauge.  (Alternative metal gauges available on request)

insulated core

  • Structural, web-oriented mineral fiber wool
  • Shear resistant bond to sheet steel faces
  • Density:  approx. 7.5 lb/ft³  (Optional 8.7 lb/ft³ available on request)

panel connection

  • Double tongue groove interconnect — panels interlink precisely with no thermal bridge.
  • Longitudinal mineral wool surfaces are protected by a plastic barrier film to avoid moisture penetration.

testing & certifications

Vapour diffusion

  • Determined by climatic conditions inside building. Panels must be installed vapor tight — technical installation tips are provided in the installation guidelines.

Independent monitoring

  • Compliant with a wide range of US and International codes and standards.  Contact your Brucha rep for an updated list of applicable documentation.

Samples + Support

Samples

Want to see our panels up close? We have samples! Contact us and we will get one shipped to you!

Support

Need help? From theoretical questions about our panels to practical questions on how to install panels correctly, BRUCHA has you covered.

Contact Us

Let's Chat

Kuni_Scott_web_e80f74b886

Scott
Kuni

VP of Sales - Cold Storage
Jeff Gerhardt4 copy

Jeff Gerhardt

VP of Sales - West
Sherry_Jeff_frei_quadrat_web_52c2e9524c

Jeff
Sherry

VP of Sales - East

We are here for you. Whether you have a question about our panels, pricing, need a sample, or anything else, our team is ready to answer all your questions.