Fire Protection Roof Panel

BRUCHAPaneel® DP-F

Brucha’s Fire Protection Roof Panel DP-F features a non-combustible mineral wool core chemically bonded to outer and inner steel facings. This panel is suitable for both single and double sloped roofs and can be used on pitches of ⅜:12 or greater and does not require seaming.

Our DP-F Roof Panel features a triple sealed system and offers optimum protection against condensation. It also fully integrates with our PIR DP Roof Panel without adapter profiles or trims/flashings. The system comes complete with painted saddle clips for optimum sealing and panel spans and may be used over steel or wood purlins

Connect with an expert
* Contact BRUCHA directly for pricing and inquiries

Composition & Attributes

Coil-coated galvanized steel-faced panels with mineral wool core insulation

exterior

  • Width: 39-3/8” (1000 mm)
  • Lengths: 8 – 38’
  • Standard 1 mil (25 µm) PVDF (polyvinylidene)
    • Optional 1 mil (25 µm) polyester, 2 mil (50 µm) PUR-PA (polyurethane/polyamide)
  • G-90 steel, 24 gauge (.6 mm) standard, 22 gauge (.7 mm) available upon request
  • Profile: 1-5/8” (42 mm) high ribs spaced 13-1/8” (333 mm) on center

interior

  • Standard 1 mil (25 µm) polyester paint coating
  • G-90 steel, 24 gauge (.6 mm) standard, 22 gauge (.7 mm) available upon request
  • Standard profile: planked (#1)
    • Optional profiles: flat (#2), v-rib (#3)

insulation core

  • Mineral wool, fibers perpendicular to panel faces
  • R value ≈3.6/inch per ASTM C518 @ 75°F
  • CFC and HCFC free
  • Density ≈ standard 7.5 lbs/ft³ (120 kg/m³), optional 8.74 lb/ft³ (140 kg/m³)
  • Available thicknesses (nominal): 2-3/8” (60 mm), 3” (80 mm), 4” (100 mm), 4-3/4” (120 mm), 5-1/2” (140 mm), 6” (150 mm), 6-1/4” (160 mm), 7” (180 mm), 8” (200 mm)

panel connection

  • Sidejoint with overlap and capillary break
  • Through fastened with saddle clip for maximum anchorage and resistance to uplift
  • Factory installed moisture barrier at sidejoints
  • Triple sealed at panel sidejoints

testing & certifications

  • Compliant with a wide range of US and International codes and standards. Contact your Brucha representative for an updated list.

At a Glance

BRUCHAPaneel® DP-F

Manufacturing Tolerance

In line with EN 14509

Construction Width

39 3/8 in (1000 mm)

Sound Insulation

Approx. 32 dB (frequency-dependent)

Manufactured Lengths

max. 40ft (45ft by special arrangement)

Temperature Stability

194° F / 90° C

Fire Rating

FM 4471 Class 1 Fire Rating of Insulated Wall or Wall and Roof/Ceiling Panels, Interior Finish Materials or Coatings, and Exterior Wall Systems

Thickness

2 3/8 in (60 mm) – 7 7/8 in (200 mm)

Samples + Support

Samples

Want to see our panels up close? We have samples! Contact us and we will get one shipped to you!

Support

Need help? From theoretical questions about our panels to practical questions on how to install panels correctly, BRUCHA has you covered.